Step 1:

Must disconnect from the power mains before connection. Place Link Socket Type I on a flat surface.

Step 2:

Make sure the coulisse of Link Socket Type I and Link Socket Type II are in alignment. Gently push Link Socket Type II all the way into the left holes of Link Socket Type I.

Step 3:

The Link Socket bottom clasp will then be locked automatically if the connection is successful.

Step 4:

Insert Link Socket Type III into Link Socket Type II for protection.

Step 5:

Make sure Link Socket Type I, II & III are stitched to each other firmly before connecting to the power mains.
Switch on Link Socket and the device is ready to use.